1
00:00:02,700 --> 00:00:05,400
Tyre Hugger.. Let's Fit one

2
00:00:07,100 --> 00:00:10,300
During Rainy seasons, the stock tail guard

3
00:00:10,400 --> 00:00:12,900
alone can't stop the throw of mud.

4
00:00:13,000 --> 00:00:17,800
From here, mud gets thrown towards the top.

5
00:00:17,900 --> 00:00:22,200
To avoid that, i got a tyre hugger from

6
00:00:22,300 --> 00:00:23,900
Mahindra's official website. (m2all.com)

7
00:00:28,400 --> 00:00:31,800
Now let us open this and see

8
00:00:38,600 --> 00:00:40,500
Here, the Tyre hugger itself

9
00:00:40,600 --> 00:00:45,400
Then... the stands for both sides.

10
00:00:46,900 --> 00:00:49,200
And few, bolts and screws..

11
00:00:54,700 --> 00:00:58,800
This is the stand, which we fill fit at the 
sides,

12
00:00:58,900 --> 00:01:01,900
And at this end, we connect the tyre hugger

13
00:01:02,000 --> 00:01:06,800
So this is hugger . .  and here, 3 screw 
holes . .

14
00:01:06,900 --> 00:01:10,700
Once we fit it, it'll look like this

15
00:01:10,800 --> 00:01:15,600
These 3 holes should come right

16
00:01:15,700 --> 00:01:17,700
under these, to connect it..

17
00:01:17,800 --> 00:01:21,300
This plug.. needs to be removed..

18
00:01:24,200 --> 00:01:26,200
Nice!

19
00:01:36,800 --> 00:01:37,600
Okay..

20
00:01:38,400 --> 00:01:42,500
Other items, we got in the tyre hugger kit.

21
00:01:42,600 --> 00:01:46,500
So how to put this into the hugger needs 
to be looked at..

22
00:01:46,600 --> 00:01:51,400
So, this particular part.. should be placed 
on this hole

23
00:01:51,500 --> 00:01:56,300
just like that... so that it fits in..

24
00:01:56,400 --> 00:02:01,200
After fitting this one, we will look at the 
other 2 sides.

25
00:02:01,300 --> 00:02:06,100
So now i will show you how to place it there..

26
00:02:08,600 --> 00:02:13,600
Like you see, it is designed to go under 
the existing part

27
00:02:13,700 --> 00:02:18,500
Once we fit it. This shape will be seamless,

28
00:02:18,600 --> 00:02:23,400
when placed beneath after tightening the 
nut.

29
00:02:23,500 --> 00:02:25,000
Use a star screw driver ...

30
00:02:25,100 --> 00:02:30,600
We'll put this.... and fit it..

31
00:02:40,200 --> 00:02:43,700
We'll have to apply some pressure, since 
the shape here..

32
00:02:43,800 --> 00:02:48,600
should get along with the rest of the hugger.

33
00:02:48,700 --> 00:02:53,500
So just slightly push it & tighten the screw, 
so that automatically

34
00:02:53,600 --> 00:02:54,400
it is remains tight.

35
00:03:02,400 --> 00:03:05,100
Tightened.. Ok.

36
00:03:05,200 --> 00:03:10,000
Now, the curve is perfect on this side and 
looks continuos

37
00:03:10,100 --> 00:03:11,500
Now, we'll fit the remaining one.

38
00:03:12,000 --> 00:03:16,400
This portion should be facing downwards..

39
00:03:16,500 --> 00:03:21,300
Once we place it, it should be facing the 
tyres.

40
00:03:32,200 --> 00:03:33,100
Simple!

41
00:03:39,800 --> 00:03:45,900
Like i said, you'll have to apply some pressure 
to fit & look seamless.

42
00:03:46,000 --> 00:03:50,800
Hold the thumb tight, so that screw go in 
and remains tightened.

43
00:03:57,500 --> 00:03:59,600
Tighten it 'maximum'

44
00:04:00,300 --> 00:04:04,500
Even after rainy season, one need not remove 
this.

45
00:04:05,500 --> 00:04:09,400
Max Tightened... both sides.

46
00:04:11,700 --> 00:04:16,400
So that part is over.The 3 screws are now 
intact.

47
00:04:16,500 --> 00:04:21,300
Now. . this portion here.. we'll

48
00:04:21,400 --> 00:04:26,200
fit this right here near swingarm

49
00:04:26,300 --> 00:04:30,500
and the other end will be connected to the 
hugger.

50
00:04:30,600 --> 00:04:35,400
So it is for this, we got the bigger Nut 
and washer.

51
00:04:35,500 --> 00:04:40,300
We'll place it in both the holes and tighten 
with the washers/bolts.

52
00:04:45,400 --> 00:04:47,000
Fits perfectly.

53
00:04:56,500 --> 00:04:58,000
The second one too . .

54
00:05:23,700 --> 00:05:25,300
This one is tightened..

55
00:05:25,400 --> 00:05:26,700
But these ..

56
00:05:26,800 --> 00:05:30,800
I don't have the right sized 'Allen Key' 
to tighten it..

57
00:05:30,900 --> 00:05:34,600
So, i will go to a mechanic to tighten it..

58
00:05:34,700 --> 00:05:38,200
So . . we'll see after that..

59
00:05:38,300 --> 00:05:43,100
Like you see now, it has been fitted well. 
Both sides

60
00:05:43,700 --> 00:05:48,600
The screws at the top, also the 2 nuts here 
down.

61
00:05:49,200 --> 00:05:53,800
Not bad, & It has not really taken away the 
looks..

62
00:05:53,900 --> 00:05:55,500
Not Bad . .

63
00:05:55,900 --> 00:05:58,200
(Sorry for the 'low voice' in this portion)