1
00:00:00,00 --> 00:00:05,900
Hi everyone, I'm making a short presentation 
of steps I take when forging CU-MAI

2
00:00:06,000 --> 00:00:10,800
I'll add explanations during each step and 
I hope it will be helpful.

3
00:00:10,900 --> 00:00:15,700
Don't forget to SUBSCRIBE and to activate 
notifications! Thank you!

4
00:00:15,800 --> 00:00:20,600
The first step is to prepare steel and copper 
pieces.

5
00:00:20,700 --> 00:00:25,500
I've used 1075 for external layers and 80CRV2 
for the core.

6
00:00:25,600 --> 00:00:30,400
and of course the two layers of COPPER

7
00:00:30,500 --> 00:00:35,300
I prefer to cut copper pieces  a few millimeters 
smaller than steel

8
00:00:35,400 --> 00:00:40,200
This will help me later  when I weld them

9
00:00:50,200 --> 00:00:55,600
First fitting test of the pieces.

10
00:01:13,100 --> 00:01:18,300
It is very important to clean well all the 
components.

11
00:01:28,900 --> 00:01:35,300
STAY CLOSE FOR THE SURPRIZE!

12
00:01:39,700 --> 00:01:45,000
Bad habit to strike the welding arc on the 
vise, don't do it!!

13
00:01:49,500 --> 00:02:04,500
The copper is melting during the welding 
process and sparks around. Be very careful!! 
I don't have much welding experience.

14
00:02:04,600 --> 00:02:09,800
If you have any welding tips please share 
them in the comments below.

15
00:02:09,900 --> 00:02:14,700
I would greatly appreciate any thoughts. 
Thanks in advance!!

16
00:02:21,800 --> 00:02:27,000
If you like my content don't forget to LIKE 
and SUBSCRIBE.

17
00:02:29,300 --> 00:02:34,400
Here comes the hard job..

18
00:02:35,300 --> 00:02:40,000
Temperature is critical and also striking 
power of the hammer.

19
00:02:40,100 --> 00:02:50,100
If you have any questions I'll happily answer 
in the comments below.

20
00:03:06,000 --> 00:03:16,600
And the SURPRISE!!