1
00:00:07,900 --> 00:00:10,000
Hello, welcome to Biertap.eu!

2
00:00:10,100 --> 00:00:16,400
In today’s video we’re going to show you 
how you can install and adjust a CO2 metre.

3
00:00:16,500 --> 00:00:19,500
First we’ll attach the metre to the CO2 bottle.

4
00:00:24,500 --> 00:00:32,500
This can be done by turning the large wrench 
that is on the CO2 metre at the end of the 
CO2 bottle.

5
00:00:32,600 --> 00:00:39,400
Make sure that the metre is attached good 
and tight on the bottle to prevent leaking.

6
00:00:39,500 --> 00:00:45,000
Now it is time to secure the bottle to a 
chair or table.

7
00:00:45,100 --> 00:00:53,000
This is necessary. This way the bottle can’t 
fall and damage the meter.

8
00:00:53,100 --> 00:00:57,900


9
00:00:59,200 --> 00:01:06,700
Now it’s time to adjust the CO2 pressure. 
This can be done by opening the main faucet.

10
00:01:06,800 --> 00:01:11,600
The big knob will be turned clockwise.

11
00:01:12,500 --> 00:01:21,200
There’s a wrench on the front of the CO2 
metre, this one is for adjusting the pressure.

12
00:01:21,300 --> 00:01:26,100
Clockwise is turning up the pressure.

13
00:01:26,200 --> 00:01:32,700
Counterclockwise is reducing pressure.

14
00:01:32,800 --> 00:01:37,600
It is best to start with a little pressure.

15
00:01:37,700 --> 00:01:42,900
It’s easier to add pressure than reduce it.

16
00:01:44,000 --> 00:01:56,000
When you’re done tapping beers and want to 
cut the pressure… You only have to turn the 
main faucet until it’s closed entirely.

17
00:01:56,100 --> 00:02:01,600
Thank you for watching, hopefully you can 
use our information.

18
00:02:01,700 --> 00:02:06,500
Please contact us if you have any questions.