1
00:00:00,00 --> 00:00:03,100
Hello brothers and sisters! Today I will 
teach you how to box a face shield

2
00:00:03,200 --> 00:00:07,000
There are two reasons why they do not box 
it before shipping it

3
00:00:07,100 --> 00:00:10,300
The first reason is to save on labor

4
00:00:10,400 --> 00:00:16,100
And whatever they saved, accumulates to the 
savings for the customer or resellers

5
00:00:16,200 --> 00:00:25,300
The second reason is if they ship it like 
this, instead of these which fit more inside 
a package

6
00:00:25,400 --> 00:00:33,600
It will increase the package size that will 
be sent which will increase the cost of shipping 
to the reseller for the face shield

7
00:00:33,700 --> 00:00:40,500
That's why they thought of doing it like 
this then the customer (reseller) will package 
the box and everyone will eventually save 
more on shipping

8
00:00:40,600 --> 00:00:45,800
And this will also reduce the cost further 
as they don't need to pay for labor

9
00:00:45,900 --> 00:00:50,600
Frequently there are three items included 
in the package

10
00:00:50,700 --> 00:00:57,600
First is the box, second is the glasses which 
are in plastic, third is the acetate (shield)

11
00:00:57,700 --> 00:01:02,700
Just a reminder, the Acetate (shield) has 
a plastic film on both sides which the customer 
will remove

12
00:01:02,800 --> 00:01:06,500
This is so it won't be scratched or damaged

13
00:01:06,600 --> 00:01:11,400
Now let us proceed with the box as a lot 
of people are having a hard time assembling 
it

14
00:01:11,500 --> 00:01:20,000
So first, spread the box by pushing the corners 
then let us first start at the bottom

15
00:01:20,100 --> 00:01:26,200
There are four flaps, let's start with this 
one first

16
00:01:26,300 --> 00:01:31,100
Then let us push down on this flap. You may 
need to spread the side flaps first.

17
00:01:31,200 --> 00:01:41,900
Then push the two side flaps down. If you 
noticed, the ends went in under the first 
flap

18
00:01:42,000 --> 00:01:47,400
It should go in alright? Sometimes you may 
need to push the end flaps deeper

19
00:01:47,500 --> 00:01:54,500
Then this is the last part. What you will 
do next is fold the small flap but not too 
much

20
00:01:54,600 --> 00:01:59,400
Then you will shoot it into the gap of the 
other flap

21
00:01:59,500 --> 00:02:03,600
At the beginning you may need to do a few 
attempts.

22
00:02:03,700 --> 00:02:10,000
It is already done if you partially let go 
of the box and it does not flatten out [Don't 
forget to leave a like]

23
00:02:10,100 --> 00:02:18,600
This is how it looks like inside so you can 
see it. (Hopefull you can). There! [Don't 
forget to leave a like]

24
00:02:18,700 --> 00:02:32,000
And if all things are in place, let us put 
in the Acetate (Shield). Let us roll it but 
not too much.

25
00:02:32,100 --> 00:02:43,900
I would advise to direct where the holes 
are facing downwards so it won't hang on 
to the glasses

26
00:02:44,000 --> 00:02:52,500
Let us just put it in. Do not roll it too 
much because it may fold and the customers 
may not like it

27
00:02:52,600 --> 00:02:59,900
Let us then get the glasses in the plastic 
bag where the opening is facing upward

28
00:03:00,000 --> 00:03:08,200
Then just put it in the box. If the glasses 
are hanging on to something, double check 
the acetate (shield) as you may have rolled 
it too much

29
00:03:08,300 --> 00:03:14,200
Then just close the side flaps, fold the 
end of the top flap a little bit

30
00:03:14,300 --> 00:03:23,000
Then close the top. There we go.

31
00:03:23,100 --> 00:03:29,100
Everything is OK if you pull the top flap 
a bit and it does not open

32
00:03:29,200 --> 00:03:35,900
And it's that easy! If you get used to it 
you can even casually do each in 15 to 30 
seconds

33
00:03:36,000 --> 00:03:40,000
Take care brothers and sisters during this 
pandemic