1
00:00:02,200 --> 00:00:05,300
Scan the barcode on an attendee's badge.

2
00:00:05,400 --> 00:00:10,200
The attendee information can be found: first, 
last, and company name.

3
00:00:10,300 --> 00:00:15,100
This is not all the information provided, 
but general information about the attendee.

4
00:00:15,200 --> 00:00:19,500
The first qualifier must have a selection. 
Some selections might require additional 
information.

5
00:00:19,600 --> 00:00:24,900
A red asterisk indicates a mandatory response.

6
00:00:25,000 --> 00:00:29,800
Multiple selections may be chosen from the 
first qualifier list to create the highest 
quality lead.

7
00:00:29,900 --> 00:00:38,600
Pressing "Save Scan" or scanning another 
attendee without satisfying the qualifier 
requirements will result in a buzzer sound 
and a prompt.

8
00:00:38,700 --> 00:00:42,200
Now that you know how to scan a lead, here's 
how to edit a previously scanned lead.

9
00:00:42,300 --> 00:00:50,100
Press the "Leads List" button located at 
the top of the app. A list of captured leads 
will appear.

10
00:00:50,200 --> 00:00:54,600
Select the lead you want to edit. A screen 
similar to the home screen will open.

11
00:00:54,700 --> 00:01:02,100
Make any changes to the lead, then press 
"Save". For instance, we'll change this qualifier 
product and press "Save".

12
00:01:02,200 --> 00:01:10,900
Depending if you have multiple devices in 
your booth, scanning the same attendee later 
will reflect any changes made by scanners 
in your booth.

13
00:01:11,000 --> 00:01:19,200
Editing a lead in the list will have a status 
bar at the top that indicates whether the 
lead was modified by another device in your 
booth with a status of "Record has been updated".

14
00:01:20,300 --> 00:01:24,100
You are now fully informed on how to operate 
the scanner and manage your leads.

15
00:01:24,200 --> 00:01:29,000
Any further questions on how to operate your 
device, please direct them to your lead retrieval 
expert during the exhibition.